Understanding the Architecture of Bottles

A bottle is a container that contains liquid. It can be made from glass or plastic. Bottles usually have an opening that is either narrow or wide. This opening is often critical in the filling process. For example, if you are filling a container for a child, the opening may be an important part of the design. If you are choosing a bottle for a specific application, understanding the design and architecture of bottles can help you make the right choice.

The bottle is composed of three main parts: base, collar, and lip. These parts are generally easy to recognize on a bottle by sight, but they can be difficult to visualize unless you know the terminology. You will need to use definitions or drawings to identify these areas.

The base is the bottom of the bottle. The base is typically flat, with a small ridge around the outside for stability. However, a Champagne bottle has a larger, wider base. A Burgundy bottle has tapered sides.

The neck is the upper part of the bottle. It is a constricted area that is usually above the shoulder and below the finish. On a Bordeaux bottle, the neck is curved. In some cases, it is exaggerated.

The heel is the lowest point of the bottle. It is also a transition zone between the base and the body of the bottle. Some authors describe the entire finish of the bottle as the “lip.” Others call the rim the lip.

The finish is the part of a bottle that is the most extreme. The finish is the last phase of the molding process, and the lip is one of the defining features of this process.

There are many different terms used for different aspects of the finish. Many of these words are confusing, but the definitions and descriptions of these terms can help you understand what the terms mean.

One of the most confusing terms is the collar. Collars are sometimes called ring or skirt. They are also sometimes used to denote the lower part of a two-part finish. But this term can be a little confusing because it is often used as a shorthand for the whole finish.

Lastly, the finish is the part of the bottle that joins the neck and the shoulder. In addition to the ring, the neck usually has a parting line that indicates the joining of the finish to the bottle.

Although the terminology is a bit muddy, knowing what these parts are can help you choose the best bottle for your application. Understanding the anatomy of a bottle can help you determine whether you should use a curved or straight bottle.

Whether you are looking for a simple, traditional bottle or a high-tech, ultra-modern one, there are a variety of options to choose from. Choosing a bottle is a critical decision. So be sure to learn all you can about the shape and structure of a bottle.